The soil system is a key component of the environment that can serve as a sink of pollutants. Using processed waste for aided phytostabilization of metals (HMs) in contaminated soils is an attractive phytoremediation technique that integrates waste utilization and recycling. In this study, we evaluated the effect of biologically and thermally processed wastes, i.e. sewage sludge compost (CSS), poultry feather ash (AGF) and willow chip biochar (BWC), on phytostabilization of contaminated soil from a steel disposal dump. Greenhouse experiments with Lupinus luteus L. and amendments (dosage 3.0%, w/w) were conducted for 58 days. Soil toxicity was evaluated with Ostracodtoxkit and Phytotoxkit tests. At the end of the experiment, soil pH, plant biomass yield, and HM accumulation in plant tissues were determined. HM distribution, HM stability (reduced partition index) and potential environmental risk (mRI index) in the soil were assessed. During phytostabilization, changes in the diversity of the rhizospheric bactered here can contribute to achieving targets for sustainable development.Midlatitude waterbodies are experiencing increased cyanobacteria blooms that necessitate health advisories to protect waterbody users. Although surface waters may contain cyanotoxins such as microcystin (MC), at concentrations that pose potential public health risks, little is known about MC contamination of shoreline sediments. Based on growing evidence that lake and reservoir sediments can accumulate MCs, we hypothesized that shoreline sediments (i.e., recreational beaches) may accumulate MCs and thereby pose a potential health risk to recreational users even if people stay out of contaminated water. We sampled nearshore surface water, shoreline sediment, and porewater from seven Washington State, USA, lakes/reservoirs recreational beaches to determine MC presence/absence during or immediately following cyanobacteria blooms. We found MCs in shoreline sediments at all waterbodies using ELISA and LC-MS/MS. MC concentrations in shoreline sediments and porewaters persisted for 20 days following dissipation of cyanobacteria blooms when MC concentrations were near analytical reporting limits in corresponding surface waters. A human health risk assessment based on potential MC exposure through incidental ingestion of porewaters and sediments found, even when very high MC concentrations occur in surface waters (i.e., &gt;11,000 μg/L), estimated ingestion doses are below MC World Health Organization tolerable daily intake and U.S. Environmental Protection Agency's risk reference dose. While our findings suggest MCs in Washington State recreational beaches in 2018 did not present a significant human health risk, future blooms with higher MC concentrations could pose human health risks via the shoreline sediment/porewater exposure pathway.Anodic passivation is a key problem to reduce the efficiency of electrocoagulation (EC) process. Super-gravity technology was introduced into EC process to enhance the treatment of heavy metal wastewater using pure aluminum electrode. The results showed that the removal ratio of Cu increased, and the cell voltage decreased with the increase of gravity coefficient, suggesting a promoting effect of super-gravity field on electrocoagulation process. Electrochemical behavior of aluminium anode in super-gravity field was analyzed by potentiodynamic polarization, cyclic voltammetry and electrochemical impedance spectroscopy. It was found that anodic polarization behavior of aluminium showed a typical characteristic of dissolution in super-gravity, rather than passivation in normal gravity. The type of anode dissolution changed from pitting corrosion to uniform corrosion in super-gravity field. The outer oxidized film of anode was thinning, and more Al3+ ions were released by anode dissolution, which was attributed to the super-gravity enhancement of the mass transfer process of Cl- ions. In addition, X-ray diffraction and Fourier transform infrared spectroscopy indicated that the flocs generated in super-gravity field had amorphous and looser Al-O framework structure. As a result, the efficiency of EC process was improved by super-gravity.From metal-organic chemistry, metal-organic frameworks (MOFs) are of supreme interest for catalysis and environmental settings. Owing to anthropogenic sources and booming industrial practices, the most challenging issue is increased water pollution and environmental insecurity. For instance, several types of synthetic dyes are toxic up to a certain extent, as emerging organic contaminants (EOCs) pose adverse environmental and potential health consequences. A gradual increase in the contamination sources and unpredictable environmental changes in terms of anthropogenic pollution severely affect both water availability and distribution. Therefore, the treatment of dyes containing wastewater matrices for water resource generation is one of the most important tasks, which must be addressed effectively. With structural tunability, MOFs have been appearing as a robust tool for remediating toxic pollutants from wastewater matrices. Moreover, the promising functionality, structural tunability, robust catalytic attributes, compatibility, large surface area, stability in water, and ease in surface functionalization make MOFs one of the considerable materials of interest. This review work spotlights the present-day progress related to MOFs and their catalytic and adsorptive chemistry for a sustainable environment. Following a brief introduction, the characteristic rendering MOFs, as adsorbents, are given with prominent examples. Next, several synthesis routes as a roadmap to engineer MOFs are discussed. From the applied perspective, the adsorptive and catalytic potentialities of MOFs as given by addressing sustainable mitigation of toxic dyes. The last section of the work illustrates key challenging issues and future directions by considering the suiting importance of MOFs.Efficient adsorption of organic dyes from effluent has great importance for ecological and environmental protection. Herein, covalent triazine frameworks (CTFs) were constructed via the polycondensation of melamine and cyanuric chloride directly. Due to the numerous basic nitrogen atoms as high as 58.98 wt%, high BET surface area (670.2 m g-1), and hierarchical pore structure, CTFs demonstrated selective adsorption of anionic dyes in high capacity (e.g., a maximum adsorption capacity of 1581 mg g-1 for Congo red at 30 °C). The mechanism of the outstanding adsorption performance was carefully verified and ascribed to the electrostatic attraction and hydrogen bonding between CTFs and anionic dyes. The amine groups linking two adjacent triazine rings have primary responsibility for the superior performance. https://www.selleckchem.com/products/Naphazoline-hydrochloride-Naphcon.html Unexpectedly, CTFs expressed a tuning synergetic effect for removing cationic dyes in aqueous solution coexisting with anionic dyes, exhibiting a great superiority in the specific and comprehensive treatment of organic dyes contaminated water.